|
OCCS50 |
OCCS51 |
Measurement range |
0 to 5 mg/l (ppm) ClO2 0 to 20 mg/l (ppm) ClO2 |
0 to 5 mg/l (ppm) HOCl 0 to 20 mg/l (ppm) HOCl |
Power supply voltage |
100 to 230 V AC, 48/62 Hz or 24 V AC/DC (Transmitter : OCM223,253) |
|
Process pressure |
The medium pressure directly upstream from the sensor membrane must not exceed 1 bar (14.5 psi)abs. |
|
pH range |
Stability range of ClO2 : pH 2 to 10 Calibration : pH 4 to 8 Measurement : pH 4 to 9 |
Calibration : pH 4 to 8 Measurement : pH 4 to 9 |
Operating temperature |
0 to 55℃ (non-freezing), |
|
Materials |
Sensor shaft : PVC Protection cap : Vessel – PC Makrolon Cable sheathing : PVC Seal – Kraiburg TPE TM5MED Membrane : PVDF Cover – PC Makrolon (polycarbonate) Membrane cap : PVDF Sealing ring : FKM |
|
Degree of protection |
IP68 (1.8m) water column over 7 days at 20℃ |
|
Sensor cable length |
Max. 3m |
OCCS50,OCCS51
l 빠른 응답 시간으로 정확한 프로세스 뷰를 제공하며 효율적인 프로세스 제어 뿐만 아니라
프로세스 변경에 대한 신속한 대응이 가능합니다.
l 프로세스 안전성 향상: 정확하고 장기간 안정적인 측정을 통해 일관된 프로세스 모니터링이 보장되며
l 유연한 설치: 센서는 OCCA151 및 OCA250 흐름 용 부품 또는 삽입 용 부품에 설치할 수 있습니다.
l 유지 관리가 낮은 암페어 측정 센서는 특히 염소계 측정 시스템에 비해 측정 지점의 소모 비용을
l Liquisys 염소 송신기에 연결하면 설치된 아날로그 이산화염소 측정 지점의 연속성을 보장합니다.